Description
Made in America. This product is custom-made for you and cannot be returned, except for defects. Please call customer service for free fabric samples and assistance with ordering. Passes the California 701 test for fire retardancy. Toll-Free 800-385-4211. This product is custom-made for you and cannot be returned, except for defects. Please call customer service if you wish assistance with ordering.
Light filtering semi-sheer fabrics fashioned in our classic Batiste pinch pleated sheers soften the lines of any window, and provide a custom finish whether used alone or installed under draperies. Need Options? Our Custom Voile Pinch Pleated Curtain is another favorite.
Our custom-made pinch pleated sheer curtain drapery with a 2 1/2 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleated Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.
Lengths longer than 101″ will have one seam per panel on the outside section which hides underneath over drapery, call us toll-free for a quote at 800-385-4211.
All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.
Colors: White, Winter White, or Champagne (call for fabric sample)
Our pinch pleated sheer curtains are made to measure sheers with the following attributes:
* Weighted corners
* 4″ top buckram with double turn on top
* 1 1/2″ double fold side hems blind stitched
* Bottom hem 4″ double fold
* 100″ Polyester, FIRE RETARDANT, and fade resistant
Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.
HOW TO MEASURE: Measure the total width of your rod, For a pair add 4 inches to accommodate overlap. Add 8 inches to cover returns on both sides if desired. If you want a single panel with no returns just use the width of your curtain rod to order. Length is measured from the top edge of the drapery to the bottom edge. If measuring to the floor, allow approximately one inch from the floor./
